The hard part is getting a licensed electrician to wire up the clamp on. The pins on the board should be in the same place as the header beside it as one is supposed to connect to the other. The Expandable 6 Channel ESP32 Energy Meter can measure the amount of current. You can even design your own PCBs and have them fabricated from the files you design. Did you try Google Heres one result, 3rd entry down. Favorite 15 What is Fritzing Fritzing is a great open source tool for anyone to teach, share, and prototype their electronic projects It allows you to design a schematic, and thus a part, which can then be added to very professional-looking wiring diagrams. There should be a terminalId=“connector3terminal” added to the schematic connector entry above. does anyone have the part for using L298N motor driver in Fritzing Could you send me the file thank you. In the current fzp file many of the pins lack the terminalId definition causing the above problem. The pads are oblong/rectangular - so it is possible to route between pads. The pins are (obvious) in two rows and the distance between the two rows is 11pins (about 1000 mil). Choose 'Export.', then specify a name and location to export. Where each connector has a terminalId called connectorxterminal which is also in the schematic svg. I want to share a part: It is a DOIT ESP32 DEVKIT V1 with 30 pins. To export your part, select the part in the Part Library and click the part icon at the bottom of the library. These images need to be exported into SVG format.

Image Editor In order to make your parts, you need to make the images for all three views: breadboard, schematic, and PCB. The wires are connecting to the center of the pin because the terminalIds are not correct (missing completely in some cases.) The fzp file should look like this: Step 1: Required Downloads Fritzing The first piece of software you will need, is of course, Fritzing, which is free.

Esp32 fritzing import part